Full Rate ADSL2+ Modem Router with 4 Ports Switch

AR-7084B

(End-of-Life Product)

  • Full Rate ADSL2+ connection
  • Supports lP Sharing up to 253 user
  • Advanced Firewall and Access Control
  • Supports 8 Public IP Addresses
  • Web-Base Configuration
  • Firmware upgradable



Built-in High Performance ADSL2/2+ Modem
The AR-7084B is ADSL router runs at speeds up to 24Mbps downstream and 1Mbps upstream, providing higher data rates than traditional ADSL systems. Also, it is backward compatible with existing ADSL services and interoperable with legacy equipment. The ADSL router supports ADSL standard: G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3 (ADSL2), G.992.4 (splitter less ADSL2), G.992.5 (ADSL2+) for Annex A, B. (Annex A and B are supported in different H/W platform)

Easy Setup with EZMax Multi-language Installation CD *
A unique 16-languages setup wizard is included in the installation CD for you to setup Internet connection, router password and firmware upgrade. You can setup the router connecting to the Internet within minutes by following the simple animated steps.

Virtual Server / DMZ
The ADSL router supports 8 Public IP Address mapping so you can set up multi servers (Web server, Mail Server and IP camera...) inside your network for Internet users to access.

Firewall
AR-7084A provides Firewall to protect you from the following Internet attacks,  SYN Flooding, Ping of Death, Teardrop and Land Attack. You can restrict users to access the services like Web, Telnet, Ping, FTP and SNMP. Also, you can also block some IP addresses to access Internet thought AR-7084A to increase the security.

Web Configuration
The router can be configured through the friendly Web interface with a Web browser from Internet or Intranet.

IP SHARING
The NAT/NAPT function lets you share the broadband connection to all the network users (up to 253 users)

* The EZMax Setup CD Wizard only supports Edimax router.

 





APPLICATION DIAGRAM

An example of how the AR-7084B can be setup :
• Connect the AR-7084B ADSL port to Internet Service Provider via RJ-11. •Connect a computer to the LAN port and setup the Internet connection by running the EZMax setup wizard.
• Share the Internet connection with other wired computers/devices.
 

 



HARDWARE INTERFACE

MANAGEMENT

POWER ADAPTER

  • 1 x RJ-11 10/100Mbps WAN Port
  • 4 x RJ-45 10/100Mbps Ethernet LAN Ports
  • LED Indicators: Power, WAN, LNK/ACT for LAN
  • Reset Button
  • Supports Remote Management
  • System Status and Security Log (Web Interface)
  • Firmware Upgradeable
  • DC 12V, 0.5A

WAN

INSTALLATION

MEMORY
ADSL Standard:
  • G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3 (ADSL2), G.992.4 (splitterless ADSL2), G.992.5 (ADSL2+) for Annex A, B
  • 16-languages EZMax Setup Wizard
  • 2 MB NOR Flash
  • 8 MB SDRAM
SECURITY
TEMPERATURE
HUMIDITY
  • NAT/NAPT IP Sharing
  • DHCP Server/Client
  • DMZ
  • SPI Anti-Dos Firewall
  • 0~45 Degree Celsius
  • 10-90% (Non-condensing)
FUNCTIONS
DIMENSION

CERTIFICATIONS

  • IGMP Snooping
  • DDNS and SNMP
  • Virtual Server
  • Supports ACL, MAC/IP/Application Filter and URL BlockingV
  • UPnP
  • VPN Pass Through (IPSec/PPTP)
  • 196 x 109 x 30 mm
  • CE, FCC

 

*Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors.
*Actual viewing resolution and frame rate of network cameras depend on connection speed.
*Product specifications and design are subject to change without notice.