The BR-6428nS V4 is a 300Mbps high-speed 5-in1 multi-function Wi-Fi solution which supports IEEE 802.11b/g/n standards and provides significantly improved coverage with the High-gain antenna. Operating as a router, access point, range extender, Wi-Fi Bridge or WISP, the BR-6428nS V4’s flexibility meets the demands of any networking applications. The smart iQ Setup wizard makes setup and installation as easy as a few clicks. Impressive performance and a competitive price make the BR-6428nS V4 a cost-effective solution for home or small office environments.

 

5-in-1 Wi-Fi Router, Access Point, Range Extender, Wi-Fi Bridge and WISP

The BR-6428nS V4 can work as router, access point, range extender, Wi-Fi Bridge or WISP. Just configure the mode you need for your network environment using the smart iQ Setup wizard.
 
Switch mode using the smart iQ setup wizard on any device with a web browser, no CD required.
*Mobile device setup requires iOS 4.0 or Android 4.0 and above.


 

Smart iQ Setup

   

Multi-SSID & VLAN Support* 

Multi-SSID enables users to configure up to five separate SSIDs in order to group and manage users according to your requirements. 
*Access point mode only

Guest Network*

Supports a guest network to provide connectivity while isolating guests from your primary network.
*Router mode only


 

 

SPECIFICATIONS
​

Functions	Supports router, access point, range extender, wireless bridge and WISP modes Guest Wi-Fi network in router mode Up to 5 SSIDs in AP mode IGMP proxy and IGMP snooping DDNS and DHCP Port triggering for special applications Virtual server and DMZ hosting MAC/IP filter and URL blocking iQoS for smart bandwidth management Static routing UPnP architecture VPN pass-through (IPSec/PPTP) Wi-Fi schedule control Fault tolerance firmware upgrade
Hardware Interface	1 x RJ-45 Fast Ethernet WAN port 4 x RJ-45 Fast Ethernet LAN port LED indicators: power, WAN, Wireless, WPS, new firmware notice and firmware upgrade status 2 x High-gain antennas WPS/Reset button
Management & Installation	Multi-language user interface Supports remote management System status and security log Firmware upgradable Smart iQ Setup, no CD required
WAN	Supports WISP connection mode Supports RJ-45 cable/xDSL modem Supports DNS Proxy WAN protocol: PPPoE, Static IP, Dynamic IP, PPTP and L2TP
Output Power	11b (11Mbps): 20±1.5dBm 11g (54Mbps): 18±1.5dBm 11n (20MHz, MCS7): 18±1.5dBm 11n (40MHz, MCS7): 18±1.5dBm
Receive Sensitivity	11b(11Mbps): ‐85±2dBm 11g (54Mbps): ‐68±2dBm 11n(20MHz, MCS7): ‐68±2dBm 11n(40MHz, MCS7): ‐68±2dBm
Security	NAT/NAPT IP sharing 64/128-bit WEP encryption and WPA-PSK, WPA2-PSK security DHCP Server/Client QoS for critical operations SPI anti-DoS firewall
Memory	4MB NOR Flash 32MB SDRAM
Humidity & Temperature	Humidity: 10-90% (non-condensing) Temperature: 0-40°C
Power Adapter	DC 5V, 1A
Dimensions	145(H) mm x 88(W) mm x 24(D) mm
Weight	140g
Certification	FCC, CE

 

PACKAGE CONTENT

• Broadband router (main body, 1 pcs)
• Quick Installation Guide (1 pcs)
• One CD-ROM (Including the Setup Wizard, Multi-languages Quick Installation Guide and User Manual)
• 5V DC power adapter (1 pcs)
• Ethernet Cable

 

HARDWARE INTERFACE